HIGH QUALITY PUMP PRODUCTS

Our sales team’s excellent pump and system knowledge enables us to supply and, where appropriate, modify our partners products. We can supply complete skid packages, including drivers & auxiliaries, individual pumps and spare parts.

Solid Handling

Having extensive knowledge and experience within the industrial pump industry we can deliver a solution to meet your centrifugal pump and submersible pump requirements.

K-HS™ Severe Duty Horizontal Pump K-HS™ Severe Duty Horizontal Pump

K-HS™ Severe Duty Horizontal Pump

Engineered with the latest hydraulic and wear technologies to cope with the most severe corrosive and abrasive slurry applications.

  • Modular design technology
  • Double cased for safety and allows retrofitting for various liners
  • Advanced K-IBA™ bearing assembly with modern bearing isolators
  • Standard or K-HEE™ advanced impeller design options availableMultiple seal arrangements options, including K-ISS™ mechanical seal
  • Ease of maintenance
  • Single piece sleeves allow for easy maintenance and removal
  • Polycarbonate coupling guard for long wear life

Range:  25 mm (1”) to 500 mm (18”)

Flows to: 7,300 m³/h (32,144 USgpm)

Heads to: 110 m (361 ft)

Pressures to: 2,100 kPa (305 psi)

K-VS™ Heavy Duty Vertical Sump Pump K-VS™ Heavy Duty Vertical Sump Pump K-VS™ Heavy Duty Vertical Sump Pump

K-VS™ Heavy Duty Vertical Sump Pump

Designed for handling abrasive and corrosive liquids and slurries, while submerged in sumps or pits. Offers a wide range of configurations allowing the pump to tailored to a specific application.

  • Setting depths from 0.9m to 2.4m
  • Simple installation
  • Cantilever design so there are no submerged bearings or shaft seals
  • Can run dry (snore) continuously
  • Ease of maintenance
  • Available in a pre-fabricated conical sump with quick clean facilities
  • Replaceable strainers allows for easy maintenance
  • Bearings are interchangeable with our horizontal pumps, reducing inventory levels

Range: 38 mm (1.5”) to 152 mm (6”)

Flows to: 580 m³/h (2,554 USgpm)

Head to: 60 m (197 ft)

Pressures to: 2,100 kPa (305 psi)

K-MP™ Solid Case Horizontal Pump

K-MP™ Solid Case Horizontal Pump

A versatile pump with the ability to be adapted to suit several applications. Can significantly reduce power consumption, lower operational costs and increase production.

  • Modular design technology
  • Double cased for safety and allows retrofitting for various liners
  • Advanced K-IBA™ bearing assembly with modern bearing isolators
  • Standard or K-HEE™ advanced impeller design options available
  • Multiple seal arrangements options, including K-ISS™ mechanical seal
  • Ease of maintenance
  • Single piece sleeves allow for easy maintenance and removal
  • Polycarbonate coupling guard for long wear life

Range: 50 mm (2”) to 150 mm (6”)

Flows to: 900 m³/h (3,900 USgpm)

Head to: 100 m (328 ft)

Pressures to: 800 kPa (116 psi)

K-L™ Low Head Horizontal Pump

Developed for continuous use in slurry applications where large flow at low to medium developed head is required. Shares proven unique design features with the K-HS™ pump range.

  • Heavy duty design results in improved reliability and ease of maintenance
  • Modular design technology
  • Single piece sleeves allows for easy maintenance and removal
  • High efficiency K-HEE™ impellers prolong wear life and reduce operating costs
  • Advanced K-IBA™ bearing assembly with modern bearing isolators
  • Multiple seal arrangements options, including K-ISS™ mechanical seal
  • Ease of maintenance
  • Double cased for safety and allows retrofitting for various liners

Range: 25 mm (1”) to 250 mm (10”)

Flows to: 1,550 m³/h (6,824 USgpm)

Head to: 50 m (164 ft)

Pressures to: 700 kPa (101 psi)

K-G™ Dredge and Gravel Pump

K-G™ Dredge and Gravel Pump

Capable of handling large particles at consistently high efficiency, resulting in lower costs. Designed to pump extremely aggressive slurries with a wide particle distribution.

  • Heavy duty casing designed to minimise internal velocities resulting in greater efficiency and prolonged wear life
  • Solid bearing frame reduces vibrations and associated distortions from external piping loads
  • Segmented volute clamp ring allows casing rotation to any required angle, removing the need for expensive high wearing bends
  • Impeller pump out vanes reduce gland pressure and improve efficiency with reduced circulation
  • Advanced K-IBA™ bearing assembly with modern bearing isolators
  • Multiple seal arrangements options, including K-ISS™ mechanical seal

Range: 100 mm (4”) to 600 mm (24”)

Flows to: 5,760 m³/h (25,361 USgpm)

Head to: 60 m (196 ft)

Pressures to: 500 kPa (73 psi)

K-G™ Dredge and Gravel Pump

Capable of handling large particles at consistently high efficiency, resulting in lower costs. Designed to pump extremely aggressive slurries with a wide particle distribution.

  • Heavy duty casing designed to minimise internal velocities resulting in greater efficiency and prolonged wear life
  • Solid bearing frame reduces vibrations and associated distortions from external piping loads
  • Segmented volute clamp ring allows casing rotation to any required angle, removing the need for expensive high wearing bends
  • Impeller pump out vanes reduce gland pressure and improve efficiency with reduced circulation
  • Advanced K-IBA™ bearing assembly with modern bearing isolators
  • Multiple seal arrangements options, including K-ISS™ mechanical seal

Range: 100 mm (4”) to 600 mm (24”)

Flows to: 5,760 m³/h (25,361 USgpm)

Head to: 60 m (196 ft)

Pressures to: 500 kPa (73 psi)

K-ISS™ Mechanical Seal

K-ISS™ Mechanical Seal

Combines the best features of sealing solutions in one cost effective choice.

  • Can operate with low NPSHA
  • Can withstand high suction pressures
  • Water utilisation of the K-ISS™ seal is up to 90% less than alternative solutions
  • Automatically compensates against changes in suction pressure and wet end wear
  • Water flow under the flush loss seal keeps it clean during shutdown periods
  • Incorporates slurry free zone to improve sealing, the only part in contact with slurry is the seal adaptor

K-HEE™ Severe Duty High Efficiency Impeller

K-HEE™ Severe Duty High Efficiency Impeller

Engineered with the latest hydraulic and wear technologies for high efficiency and increased wear life.

  • Increase wear life – reduces throat bush wear, increasing wear life by up to 160%
  • Reduce site inventory – can be used for both fine and coarse slurry applications
  • A chemically bonded sand casting process has been used, which improves surface finish and further increases wear life
  • It has superior resistance to recirculating flows – twisted vanes enable better eye inlet conditions, controlling flow paths
  • Reduce operating costs – higher pump efficiency sustained over a longer pumping operation time
  • Reduce carbon emissions – lower pump power consumption
  • Wide range of materials including chrome iron, rubber, urethane, Keramithane™ (ceramic beads in urethane matrix) or specialist materials